From Quartz to Gold Bar: The Science Behind Africa’s Golden Wealth
A field guide to the rock, engineering and accountability behind every refined bar.
Before gold reaches a jewellery counter, an electronics factory or a reserve vault, it passes through a chain of geological discovery, extraction, processing and verification. The finished bar conceals the work behind it: rock moved, energy consumed, water managed and people employed.
Gold can occur naturally as a bright metallic grain. But much of the gold recovered by modern mines is too finely dispersed to recognise by eye. The challenge is to locate it, release it from its mineral surroundings and recover enough of it to justify the operation.
1. What gold mining actually means
Gold mining brings together exploration, mine development, extraction, mineral processing and eventual closure. The shovel is only one part of the story. Before construction, a project needs geological evidence, engineering studies and the relevant authorisations. After production stops, rehabilitation and monitoring remain part of the mine’s responsibilities. [1]
Gold-bearing rock is not automatically economic ore. Whether it can be mined profitably depends on the grade, the amount that can be recovered, mining conditions and costs. An attractive specimen is no substitute for representative sampling.
2. Quartz: a geological clue, not a promise
Quartz is silicon dioxide, written SiO₂. It can fill fractures in rock, and some gold deposits contain gold-bearing quartz veins. But many quartz veins contain no economically useful gold. Gold may also occur in other geological settings. [4–5]
Gold: Au
Pyrite: FeS₂
Three different materials
Quartz is a mineral compound. Gold is an element. Pyrite is iron sulphide, often called “fool’s gold”. A glittering surface cannot establish gold content; laboratory analysis is needed.
In quartz, SiO₂ describes the overall proportion of silicon to oxygen in a continuous crystal framework. It does not mean that ordinary quartz is made of isolated little SiO₂ molecules. [5]
3. From discovery to extraction
Surface mines remove material from an open excavation. Underground mines reach deeper deposits through shafts, declines and tunnels. The choice depends on the deposit’s shape and depth, rock conditions, economics and environmental constraints. Placer operations work with gold concentrated in loose sediments; their processing route can differ substantially from hard-rock mining.
Exploration teams combine mapping, sampling and drilling to understand what lies beneath the surface. AI can help organise geological data and rank exploration targets, but a prediction is not a discovery. Drilling, reliable assays and qualified geological interpretation must test the idea.
4. Crushing and grinding: releasing the gold
At a hard-rock plant, crushers reduce large pieces of ore. Grinding mills then reduce particle size further. The aim is liberation: exposing valuable material so a suitable recovery process can reach it. Water is commonly added to create a slurry. Classification equipment separates particles by size and returns coarse material for further grinding. [2]
The right grind depends on the ore. Too coarse, and gold may remain enclosed in other minerals. Unnecessary grinding adds cost and energy demand. The processing plant must be designed around testwork, rather than the appearance of the rock.
5. Separating valuable metal from waste
| Method | What it uses | Important distinction |
|---|---|---|
| Gravity concentration | Differences in mineral density | Can recover suitably liberated gold; it does not capture every form of gold in every ore. |
| Flotation | Controlled mineral-surface behaviour and air bubbles | Often concentrates sulphide minerals carrying gold, rather than producing a finished gold bar. |
| Leaching and metal recovery | A controlled chemical route followed by recovery from solution | Requires ore-specific design, containment and treatment; it is not a universal recipe. |
Plants can combine methods. Gold locked within certain minerals may require additional treatment before it is accessible. The correct route comes from mineralogical studies and metallurgical testing. In one documented plant route, dissolved gold and silver are captured using activated carbon, recovered through further treatment and electrowinning, then smelted into doré. [2]
Processing also creates waste streams. Water management, dust control, tailings storage and reagent controls belong in the operating design from the beginning.
6. The mathematics behind a gold claim
Ore grade is commonly expressed in grams of gold per metric tonne of ore, abbreviated g/t. Contained gold and recovered gold are different quantities.
Recovered gold (g) = contained gold (g) × recovery fraction
Recovery (%) = recovered gold ÷ contained gold × 100
A worked example
Suppose a plant processes 50 tonnes of ore grading 2 g/t, with 90% recovery. The ore contains 100 grams of gold; the assumed recovery yields 90 grams. The remaining 10 grams are unrecovered in this simplified balance.
In actual operations, sampling, moisture corrections, work-in-progress and reconciliation matter. A laboratory result from one unusually rich specimen cannot be applied to an entire stockpile.
7. Smelting, refining and the difference between them
Melting changes physical state. It does not automatically remove other metals. Smelting separates metallic material from other components and can produce doré, an alloy that commonly contains gold and silver. Its composition varies with the ore and process. Refining then separates metals and reduces impurities to meet a specified product standard. [1–2]
Gold from a mine is therefore not necessarily ready for sale as investment-grade bullion. The mine product, the refinery product and the final retail product may be different things.
8. How a gold bar becomes verifiable
Gold bars can be cast from molten metal; some smaller products are made by minting prepared blanks. Assay establishes fineness—the gold content expressed in parts per thousand. As one market-specific example, LBMA London Good Delivery gold requires a minimum fineness of 995.0, equivalent to 99.5%. Other products have other specifications. [3]
Fine gold mass = gross bar mass × (fineness ÷ 1,000)
Example: 1,000 g × (999.9 ÷ 1,000) = 999.9 g fine gold
Refiner marks, serial numbers and other required identifiers help connect a bar to its records. A stamp alone does not prove authenticity: a trusted assay, recognised provenance and credible custody records remain essential.
9. Africa’s value question extends beyond extraction
Gold supports jewellery, industrial applications and financial holdings. For producing communities, the more demanding question is how that activity translates into durable benefit. Panafrican.email’s editorial priorities are skilled work, transparent purchasing, credible mineral accounting and environmental responsibility.
A responsible value chain should make it possible to ask where the ore came from, who handled it, what was recovered and how the site is being managed. Refining capacity is valuable, but a refinery cannot substitute for reliable sourcing records or sound mine operations.
Questions readers ask
Does every quartz vein contain gold?
No. Quartz is common, and its presence alone does not demonstrate a gold deposit.
Can gold be recovered without crushing rock?
Yes, in some settings. Gold already released into sediments can follow a different route from gold enclosed in hard rock.
Does melting make gold pure?
No. Purity requires measurement, and refining may be needed to separate other metals.
Does a higher ore grade guarantee a better project?
No. Recovery, scale, access, costs, infrastructure and environmental obligations also influence viability.
Sources and technical reading
- World Gold Council — The lifecycle of a gold mine.
- OceanaGold, Waihi — Ore processing. A documented plant example, not a universal flowsheet.
- LBMA — Good Delivery technical specifications.
- USGS — Quartz; USGS research record — Formation mechanisms of quartz veins in orogenic gold deposits.
- University of Minnesota — Quartz.
Sketches are schematic and not to scale. Formulas are educational mass-balance relationships, not operational instructions. Technical sources checked 16 November 2026.


Leave a Reply